目前SAVAGE車上的電變 後退的設定是無煞車 直接倒退..已經有訂購設定線了 但是貨還沒到
想問從遙控器上設定成倒退0% 這樣會對電變有傷害嗎? 當油門往前推煞車時 紅燈是不亮的 車子也不會有任何動作 因為電變不便宜怕怕的 所以來問一下

電變可以用聲音識別 直接設定

請問大大 不知道那邊有文章在說明的呢? 我也有在RC FANS那邊找過 不過不知道是不是關鍵字不對 始終找不到正確的文章

mk14大:
簡体字版
http://bbs.rcfans.com/viewthread.php?tid=244320&extra=page%3D1

感謝你 Z大 電變的設置 我有聽你講解 是OK的 但是正常應該是前推一下是煞車 在推一下是倒車 現在卡在推第一下就直接倒車了

mk14大:
你先看看明天有空在翻譯
STEP 1: We’re starting with the
transmitter ON and the ESC switched
OFF and not connected to the battery

STEP 2: Plug a battery into the ESC.
Hold full throttle on the transmitter and
turn the ESC switch ON. After a few
seconds you will get the four rings in
a row signaling full throttle calibration.
Keep on holding full throttle.

STEP 3: After a few more seconds, you
will hear another four rings in a row.
After the second group of four rings,
relax the throttle to neutral. If you have
successfully entered programming
mode, the ESC will beep twice, pause,
and repeat the two beeps

The programming sequence is always
presented in sequential order and
always starts with the first setting
(Reverse Lockout) within the first
section (Reverse Type). The first
beep(s) signifies which section of
the programming you are in and the
second beep(s) signify which setting is
waiting for a “yes” or “no” answer.
As you go sequentially through the
options, you will need to answer
“yes” by holding full throttle, or
answer “no” by holding full brake
until the ESC accepts your answer by
beeping rapidly. Once an answer has
been accepted, relax the throttle back
to neutral for the next question. After a
“no” answer is accepted, the ESC will
then present you with the next option
in that section. After a “yes” answer is
accepted, the ESC knows you aren’t
interested in any other option in that
section, so it skips to the first option in
the next section.
Settings explanations
The Mamba Max ESC is extremely
flexible and may be “tuned” like any
other part of your car or truck. The
following section explains all the
settings available to you via manual
programming and what each one
does to change the reactions of the
ESC in order to tune it to your specific
preferences. More settings are
available via Castle Link.
1. Brake/Reverse type
Sets whether reverse is enabled or not,
and exactly how it can be accessed.
Setting 1: Reverse Lockout (Default)
This setting allows the use of reverse
only after the ESC senses two seconds
of neutral throttle. Use it for race
practice sessions and bashing, but
check with your race director to see if
this setting is allowed for actual racing.
Setting 2: Forward/Brake Only
Use this setting for actual sanctioned
racing events. Reverse cannot be
accessed under any circumstances
with this setting.
Setting 3: Forward/Brake/Reverse
Reverse or forward is accessible at
any time after the ESC brakes to zero
motor RPM (if the vehicle is moving).

感謝各位大大 解說 設定卡已經到了 不用在聽音辯位了

設定卡 方便很多
但 usb線 更棒
好多可以玩的設定 只有連電腦可以改

設定卡也具備電腦連線功能喔.

是喔
我的還沒有到
不知道也可以連電腦!
還好 USB連線是送的 設定卡 才10usd

10usd還免運真的是物超所值, 不換可惜啊.
唯一缺點就是不含 USB cable , 加購還賣貴貴的.

那條usb cable不就是一頭標準usb 一頭MINI usb嗎?
這種線 網路一堆
但有設定卡 在外面玩 可以隨時改
真的很方便
一定要帶著!

它的usb線是一般3c賣場幾乎都有賣的線 電變設定也可以經由設定卡連接到電腦 程式可以上官網抓

mk14你好:
請問一下.這個設定卡好用嗎?
我看tower這個設定卡.不止US$10.好像要近千元台幣的樣子!
要是真的才US:10.那我也要買一個!

10元是要用套裝所付的那折價卡上的序號買才有啦
但 有些包裝 是直接送usb連接套件
就不付設定卡折價卷了

小弟腦殘.不大懂C大你的意思.不過..我請我太太幫我弄看看好了!
感謝~~~

你是買成車 有包含電變馬達
因此 你必須以20以上價格 買usb設定線或卡

我自己是用單獨購買電變馬達
他是送usb連接線 或加10元換設定卡

呼~~~腦殘的我.懂C大你的意思了^^
那...我還是先玩過FLUX再看看要不要買設定卡!
感謝了~~~